Passport Laminator DILETTA CPL180 Series



Heavy Duty Passport Laminator for Manual or Fully Automated Lamination

The new dimension in travel document laminating. Laminating system for passports.

Passport Laminator

Small Footprint

The DILETTA CPL180HD internal structure has been designed to realize a compact size and full front operation. It requires only a limited installation space - Allowing it to be installed freely. By specially designing the internal structure it has been possible to incorporate the functions in a compact and simple square sheet form, without wasting space. In addition full front operation allows convenient handling of passports.

Perfect Laminating Result in Seconds

The CPL180HD has a pre-set laminating temperature and speed, adjusted to specific applications and non accessible for operators to avoid bad end results. Temperature as well as speed is very stable during the entire laminating process. Perfect end-result is guaranteed.

The Temperature Sensor is integrated in the heating element and constantly measures the exact temperature of the heating elements. It feeds the controller board with very accurate information about the heating. Hence, the PCB is capable of constantly sending small adjustments to the heating making sure the system delivers constant laminating temperature throughout the entire process.

CPL180 HDF Laminator with Automatic Passport Input Hopper

The DILETTA CPL180HDF laminator comes with an integrated auto feeder for passports. It can load up to:

CPL180 HDS Laminator with Passport Output Tray

The DILETTA CPL180HDS laminator comes with a detachable passport tray for passports. The tray can load up to:

CPL180 HDFS Laminator with Automatic Passport Input Hopper & Output Tray

The DILETTA CPL180HDFS laminator comes with an integrated auto feeder and a detachable passport tray for passports. For load capacities please refer CPL180HDF and CPL180HDS.


Almost no noise emission during stand-by and lamination
Laminates every passport from 4 up to 64 pages without any adjustment
Setup via built-in Display/Operation Panel or via USB connection (optional)
Firmware update via USB connector
Compact and stylish, with high performance design features
Produce quality results over extended periods of professional use
Perfect results on passport lamination
High Speed Temperature Adjustment - Quick warm-up time
Flexible design with possibility to add extra features and adjust to specific customer needs

Passport Laminator with Feeder

Technical Specification

Configuration DILETTA CPL 180 HD
Width x Depth x Height 398 x 245 x 147 mm³
Weight approx. 10.7 kg
Laminating Temperature Range up to 190 °C
Width max. 130 mm
Thickness max. 64 pages
Laminating time (MRP) 1) approx. 18 - 100 sec. 1)
Laminating xx dB
Stand-by 30 dB (no noise emission)
Operating Environment  
Temperature 5 to 35 °C (41 to 95 °F)
Humidity 10 to 90% RH with no cond.
Power supply  
Voltage 100 - 240 VAC, 50 / 60Hz
Power Consumption  
Off 0.4 W
Stand-by (non-heating) 1.6 W
Maximum 460 W

1) Lamination time depends on activation time of hot adhesive and penetration time of cover and paper.

The information contained herein is subject to change without notice.
DILETTA shall not be liable for technical or editorial errors or omissions contained here in.

For more information, e-mail us at

Made in Germany