DILETTA 600i
Passport Printer
High secure colour inkjet passport printing system with integrated RFID module (DISCONTINUED MODEL)
Not all printing looks alike
|
Installed in more than sixty countries worldwide
The DILETTA 600i continues the big success of the DILETTA Passport Printer Series. Within the first six months of production it has already been installed in more than ten countries worldwide.
Integrated Barcode Reader (optional)
|
Integrated RFID Technology
for e-passports (optional)
Colour Print Perfection.
For those who rely on top print quality DILETTA 600i offers an excellent choice. Each passport page will show laserprinted contours and clearly defined shades. A first-class printing quality on all security type of papers. Not only the printing of the machine-readable lines and the visual zones are of top quality but there is also the impressive colour photograph printing. This is achieved by the high performance of the print head which has a resolution of up to 4800 dpi (dots per inch). Two parallel installed print heads manage the job – DILETTA 600i sets the professional standard for colour printing in the passport issuing office.
Plenty of ink available - The printer with a storage tank.DILETTA 600i cares for the needs of a busy passport issuing office. The specially developed individual ink tanks can be exchanged easily independent and make running costs extremely economical for both mono and colour prints. The DILETTA 600i comes standard with 150 ml high capacity ink tanks (66 ml for black and 28 ml for each colour ink tank), allowing them to easily cope with large volume printing demands.
|
 |
Easy replacement of ink tanks
The full front operation allows the easy exchange of each individual ink tank by opening the front ink tank cover even if the printers are stacked. Open the ink tank cover. Replace the empty ink tank indicated by a blinking light. Close the cover.
Thick or thin documents? Easy!
The DILETTA 600i Passport Printer comes with a patented passport transport system which can handle a wide range of different print requirements: It can print directly onto every page of a 4 up to 100 pages passport without any adjustment. The DILETTA 600i also handles a variety of print material such as thin paper through to carton box material, security paper, coated paper, Teslin, inkjet coated foils and films (OHP), glossy photo paper. All print results are of a high quality with brilliant colours and crisp, black text.
It is good to have a good connection
DILETTA 600i comes standard with a Hi-Speed USB 2.0 port and an integrated 10/100base-TX Ethernet adapter.
|
The integrated Hi-Speed USB Hub connects your printer and all optional hardware, like RFID Contactless Chip Module, Camera System, OCR/Barcode Reader or for example a Software Hardlock for your software application, to your PC. The Ethernet adapter connects your printers directly to the network allowing users of different operating systems to share printer resources. The Ethernet adapter is the easy way of connecting a DILETTA 600i passport printer to an Ethernet network. Instead of attaching your passport printer locally to the PC, use the Ethernet adapter and free computing resources. The main benefit is that it allows you to share your printer with other workgroup members, and compared to a PC it will handle printing faster, more reliably and more effectively. Easy configuration of all Ethernet settings via integrated Web Interface. Just open your Internet Explorer and access the printer like a conventional website by typing the printers IP address. |
|
Options
- RFID Contactless Chip Reader and Writer
You can equip your DILETTA 600i passport printer with an integrated contactless chip reader / writer. So you can write in one-pass the holders' information during the print process. This avoids writing of wrong information into the passport during a two step process, may caused by an operator mistake. The module supports all ISO 14443 type A and ISO 14443 type B chips with a transfer rate up to 848 kBit/s on Air Interface.
- Camera System
A camera system (camera and LED lighting) is optionally integrated into the DILETTA 600i passport printer. This enables to print the machine readable lines exactly to the page edge and the holder's data to the pre-printed text fields. Against common systems the DILETTA 600i camera system does NOT require an expensive frame grabber card inside the PC - it is connected via the printers USB cable. Accuracy of positioning: < 0.1 mm
- Barcode Reader
To avoid mixing up passport numbers you can integrate a barcode reader module for one dimensional barcodes and two dimensional barcodes (i.e. PDF417) inside of your DILETTA 600i passport printer. Before starting the print job the system captures the pre-printed passport number and transfers it to the PC.
- OCR Reader (OCR: Optical Character Recognition)
To avoid typing wrong passport serial numbers into your system you can integrate an OCR reader software module inside your DILETTA 600i passport printer. Before starting the print job the system automatically recognizes and captures the pre-printed passport number with the OCR (optical character recognition) module and transfers it to the connected PC.
Technical Specification
| Configuration | DILETTA 600i |
| Dimensions | |
| Width x Depth x Height | 500 x 530 x 210 mm³ |
| Weight | approx. 15 kg |
| Printer Driver | |
| Windows 10 / 8 / 7 (32 & 64-Bit Versions) | yes |
| Windows 2000, 2003, XP and Vista | yes |
| Linux | with generic PCL3 driver |
| Mac OSX | with generic PCL3 driver |
| PDL / Printer Languages | |
| PCL 3 GUI | yes |
| Interfaces | |
| Hi-Speed USB 2.0 port | yes |
| 10/100base-TX Ethernet adapter | yes |
| Electronic | |
| CPU | MIPS 5KF 64-bit, 300MHz |
| RAM | 32 MB |
| Flash ROM | 16 MB |
| Media Types (ICAO Doc. 9303 part 1-3) | |
| Machine Readable Passport (MRP) | yes |
| Machine Readable Visa (MRV) | yes, with optional adapter |
| Machine Readable ID-Cards (MRID) | yes, with optional adapter |
| RFID Feature | |
| Integrated RFID Module - ISO/IEC 14443 type A/B | optional |
| Printing Time (in continuous print mode) 1) | |
| Printing time per passport (best print quality) | 14 - 24 seconds |
| Printing time per passport (normal print quality) | 9 - 20 seconds |
| Resolutions | |
| Monochrome | up to 1200 x 1200 dpi |
| Colour | up to 4800 x 1200 dpi |
| Print Heads | |
| Black / Yellow | 2112 Nozzles |
| Cyan / Magenta | 2112 Nozzles |
| Operating Environment | |
| Temperature | 5 to 35 °C (41 to 95 °F) |
| Humidity | 15 to 80% RH with no cond. |
| Power | |
| Input Voltage | 100 to 240 VAC, 50 / 60 Hz |
| Power Consumption | |
| Maximum | 180 W |
| Active | 54 W |
| Stand-by | 9 W |
| Switched off | 0.15 W (110 V) - 0.78 W (240 V) |
Available Cartridges
|
All DILETTA inks are compliant with following standards:
ISO 1073/II-1976 ISO 1831 - 1980 DIN 66008 DIN 66009 DIN 66223 ICAO 9303 Part 1-3
DILETTA inks has been tested and approved by established security printers and forensic laboratories worldwide.
|
Other inks are available on request.
| 1) | Print speed may vary depending on system configuration, print mode, document complexity, software, type of paper used and connectivity. Print speed does not include processing time on host computer. |
Design and specifications are subject to change without notice.
DILETTA does not assume ay liability for completeness or accuracy in form and contents.
For more information, e-mail us at info@diletta.com.