DILETTA
Passport Laser Engraving Tower
Laser engraver for e-passports with polycarbonate data page
Ergonomic passport handling
The DILETTA Passport Laser Tower has been specially designed for ergonomic opeartion and makes it easy to insert the passport without tiring. The passport feed slot is at an ergonomic height for fatigue-free operation.
The tower is placed on the floor next to the desk. This ensures vibration-free operation of the laser unit. Its 60kg weight further enhances the vibration-free operation, resulting in perfect quality with laser-sharp text edges and finest grey scales for the image areas.
The passport is inserted at the front of the tower and then automatically drawn in. The contoured layout allows for error-free and easy insertion of the booklet. The opening closes automatically to prevent the laser beam from escaping. Once personalisation is complete, the passport is issued again at the front.
Polycarbonate passports with perfect greyscale photos
The DILETTA Passport Laser Tower supports all features of a modern laser engraving system. Particularly noteworthy are the perfect gray shades for the holder photo and the free positioning of the tilt images.
Integrated RFID Contactless Chip Encoder
Your passport laser engraver is equipped with an integrated contactless chip reader/writer. This allows you to simultaneously write the passport holder's details into the contactless chip and personalise the polycarbonate page. This prevents incorrect information from being written to the passport in a two-step process, which could be caused by operator error. The module supports all ISO 14443 Type A and ISO 14443 Type B chips with a transmission rate of up to 848 kbps on the air interface.
Laser engraving of Braille text
With your DILETTA Laser Tower you can laser engrave Braille directly onto the polycarbonate data page. This enables blind and visually impaired people to identify their passport independently and clearly.
Product Options
Select your desired features
Contactless RFID chip encoder
Your passport laser engraver is equipped with an integrated contactless chip encoder. This allows you to write the holder's information in a single pass during the printing process. This eliminates the possibility of writing incorrect information into the passport during a two-step process, which can be caused by operator error. The module supports all ISO 14443 type A and ISO 14443 type B chips with a transmission rate of up to 848 kbps on the air interface.
Barcode reader
To avoid mix-ups of passport numbers, you can integrate a barcode reader software module for 1D or 2D barcodes into your DILETTA laser engraver. Before starting the print job, the system reads the pre-printed passport number and transfers it to the PC.
OCR reader
To prevent incorrect passport serial numbers from being entered into your system, you can integrate an OCR reader software module into your DILETTA 900i passport printer. Before starting the print job, the system automatically recognizes and captures the pre-printed passport number with the OCR (optical character recognition) module and transfers it to the connected PC.
Camera system
A camera system (camera and LED lighting) is optionally integrated into the passport laser engraver. This allows the machine-readable lines to be printed right up to the edge of the page and the holder's data to be printed in the pre-printed fields
The information contained herein is subject to change without notice.
DILETTA shall not be liable for technical or editorial errors or omissions contained herein.
For more information, e-mail us at info@diletta.com.
