DILETTA SpeedLam PL91
High Speed Laminator for e-Passports
Passport laminator for heat and pressure senstive passports
No thermal or mechanical stress to passport cover or contactless chip
The passport is inserted into the laminator in the open position. Only the data page and the laminate are heated. No pressure or heat is applied to the cover, the contactless chip and other pages.
Every passport with exceptional speed
The DILETTA SpeedLam PL91 can laminate any ICAO-compliant passport with 4 to 100 pages without any mechanical adaptation. Due to direct heat, the lamination time is only 14 seconds per passport - four passports per minute.
Small Footprint
The DILETTA SpeedLam PL91 internal structure has been designed to realize a compact size. It requires only a limited installation space - Allowing it to be installed freely. By specially designing the internal structure it has been possible to incorporate the functions in a compact and simple square sheet form, without wasting space.
Features
- Specially designed for lamination of e-passports with heat sensitive cover
- No thermal or physical stress on the cover and contactless chip
- Lamination time of approx. 14 seconds per passport
- Laminates every passport from 4 up to 100 pages without mechanical adjustment
- Compact and stylish, with high performance design features
- Produce quality results over extended periods of professional use
- Perfect results on passport lamination
- High Speed Temperature Adjustment - Quick warm-up time
- Flexible design with possibility to add extra features and adjust to specific customer needs
Supported Security Foils
This DILETTA passport laminating machine is specially designed for laminating all kind of e-passport booklets with sewn-in or inlay laminates.
Sewn-In Laminate
Single Sheet Laminate
Technical Specification
| Configuration | DILETTA SpeedLam PL91 |
| Dimensions | |
| Width x Depth x Height | 205 x 195 x 185 mm³ |
| Weight | xx kg |
| Temperature | |
| Laminating Temperature Range | up to 200 °C |
| Documents | |
| Supported documents | ICAO compliant passport, or smaller |
| Thickness | max. 100 pages |
| Lamination | |
| Laminating time | approx. 14 sec. |
| Operating Environment | |
| Temperature | 5 to 35 °C (41 to 95 °F) |
| Humidity | 10 to 90% RH with no cond. |
| Power supply | |
| Voltage | 100 - 240 VAC, 50 / 60Hz |
| Power Consumption | |
| Off | 0 W |
| Maximum | max. 260 W |
DILETTA shall not be liable for technical or editorial errors or omissions contained here in.
For more information, e-mail us at info@diletta.com.
Copyright © 2020 by DILETTA Maschinentechnik GmbH, Germany - All Rights Reserved
DILETTA is a registered trademark of DILETTA Maschinentechnik GmbH - Impressum - Rechtliche Hinweise - Datenschutz