Passport Laminator
About DILETTAProductsSupportContactMy DILETTA


Passport Laminating System
for Ultra-Thin Security Foil on Supply Roll

Triple protection against overheating

Passport Laminator - Passport Laminating System


Thermal fuse and software control routines to protect against overheating

Key lock for protection of foil against theft
16bit micro controller, 20 MHz
Quick release clamping system for laminat core and take-up-roll
Serial interface for communication and configuration
Automatic passport size adaption (length and height)
Registered positioning of laminates
Update of firmware via serial interface
Laminating time < 20 seconds
For automatic or manual operation
End-Of-Foil detection
Three internal counters

incl. PC-software for individual settings and communication with laminator

Laminates for Passports
Ultra-thin Security Foils
with Hologram and Kinegram®

The security foil

The laminate comes in roll format suitable for the DILETTA laminator. During the lamination, an approx. 50 micron polyester film deposits a 6 to 8 micron tamperevident coating on the passport page. The coating is available different features with registered images and non-registered repeating images / features (wallpaper)

Full control of all settings and status

The RL90 laminator comes with a software tool with three password protected operator levels for User, Supervisor and Administrator. In the user level the laminator displays all administrative information in order to advise the user in laminators use. The supervisor level allows to adjust the laminator to a specific foil. Temperature, laminating speed, positions and many further features can be set.

Passport Lamintor - Control Software

Features that are available are:

Hologram or Kinegram®, wallpaper and registered

Optically Variable Devise Features
Micro and nano printing; fine line printing, incl. guilloche or fine line background patterns; hidden imagery, viewable with laser pen; scrambeled indicia; partial demetalized imagery;

Security foil for Passports

Optically Variable Inks
Invisible and visible UV inks; color shifting inks; OVD inks; water soluable inks; polarized color shifting inks; energy convering inks; Advantage color shifting orange to green or transparent.

Technical Specification

Configuration DILETTA RL90
Temperature Range 40 - 180 °C   (104 - 266 °F)
Laminating Speed 18 - 30 sec. per passport
Heat up time (130°C) approx. 120 sec.
CPU 16-Bit micro controller with 20 MHz
Laminating Method Heat roll, micro processor controlled
Machine Reabable Passports (MRP) yes, up to 96 pages
RS-232-C (serial) yes
USB 2.0 with optional adapter
Width x Depth x Height 360 x 240 x 220 mm³
Weight approx. 16 kg
Source 100 - 240 V, 50 / 60 Hz
Consumption max. 450 W
Heat Lamp max. 300 W
Operating Environment  
Temperature Range 5 to 35°C (41 to 95°F)
Humidity 10 to 90% RH with no cond.

Design and specifications are subject to change without notice.
DILETTA does not assume any liability for completeness or accuracy in form and contents.

DILETTA is a registered trademark of DILETTA Maschinentechnik GmbH, Germany
RL90 is a trademark of DILETTA Maschinentechnik GmbH, Germany
Kinegram is a registered trademark of OVD Kinegram AG, Switzerland

For more information, e-mail us at
Passport Laminator

Copyright © 2001-2012 by DILETTA Maschinentechnik GmbH - All Rights Reserved
DILETTA is a registered trademark of DILETTA Maschinentechnik GmbH, Germany  -  Impressum  -  Rechtliche Hinweise