Passport Laminator DILETTA SpeedLam



High Speed Laminator for e-Passports

The new dimension in travel document laminating. Laminating system for e-passports.

RFID compatible

Passport Laminator

No Damage to the Contactless Chip

In 2004 DILETTA invented a new revolutionary passport printing system. Today DILETTA offers a new revolutionary e-passport laminating system. This new generation DILETTA high speed laminating machine is specially designed for laminating all kind of e-passport booklets with sewn-in or inlay laminates without stressing the contactless chip inlay.

Exceptional speed

The DILETTA SpeedLam can laminate every ICAO compliant passport from 4 up to 100 pages without any adjustment. The laminating time takes only 9 to 15 seconds per passport (depending on activation time of adhesive may longer).

Small Footprint

The DILETTA SpeedLam internal structure has been designed to realize a compact size and full front operation. It requires only a limited installation space - Allowing it to be installed freely. By specially designing the internal structure it has been possible to incorporate the functions in a compact and simple square sheet form, without wasting space. In addition full front operation allows convenient handling of passports.

Perfect Laminating Result in Seconds

The SpeedLam has a pre-set laminating temperature and speed, adjusted to specific applications and non accessible for operators to avoid bad end results. Temperature as well as speed is very stable during the entire laminating process. Perfect end-result is guaranteed.

The Temperature Sensor is integrated in the heating element and constantly measures the exact temperature of the heating elements. It feeds the controller board with very accurate information about the heating. Hence, the PCB is capable of constantly sending small adjustments to the heating making sure the system delivers constant laminating temperature throughout the entire process.


Specially designed for lamination of e-passports
No thermal and physical stress for the contactless chip
Lamination time of approx. 9 - 15 seconds per passport
Laminates every passport from 4 up to 100 pages without any adjustment
Complete front operation
Setup via built-in Display/Operation Panel or via USB connection (optional)
Firmware update via USB connector
Compact and stylish, with high performance design features
Produce quality results over extended periods of professional use
Perfect results on passport lamination
High Speed Temperature Adjustment - Quick warm-up time
Flexible design with possibility to add extra features and adjust to specific customer needs

Technical Specification

Configuration DILETTA SpeedLam
Width x Depth x Height 375 x 270 x 140 mm³
Weight approx. 10 kg
Laminating Temperature Range up to 200 °C
Width max. 130 mm
Thickness max. 100 pages
Laminating time (MRP) approx. 9 - 15 sec.
Laminating xx dB
Stand-by 30 dB (no noise emission)
Operating Environment  
Temperature 5 to 35 °C (41 to 95 °F)
Humidity 10 to 90% RH with no cond.
Power supply  
Voltage 100 - 240 VAC, 50 / 60Hz
Power Consumption  
Off 0.4 W
Stand-by (non-heating) 1.6 W
Maximum max. 650 W

The information contained herein is subject to change without notice.
DILETTA shall not be liable for technical or editorial errors or omissions contained here in.

For more information, e-mail us at